Business Lighting incentive program
|Program||Incentive applies to…||Incentive value||Incentive maximum|
|Business Lighting||Lighting Components4, CFL-LED lamps, HID-LED lamps and their installation||Now $0.19 per kWh (up from $0.125) of projected annual energy savings1 (50% increase)||70 percent of total project cost|
|Fixtures3 and their installation||Now $0.27 per kWh (up from $0.175) of projected annual energy savings1 (50% increase)|
|Fixtures with controls||Now $0.34 per kWh (up from $0.225/kWh) of projected annual energy savings1|
|Interior LLLC3 fixtures and their installation||$75 bonus per fixture in addition to the $0.34 per kWh (up from $0.225/kWh) of projected fixture annual energy savings1|
|TLED Lamps2 and their installation||Now $4 per TLED2 lamp (up from $2) regardless of type or length in any new or existing light fixture (100% increase)|
|Street Lighting||Equipment and installation||Now $0.27 (up from $0.175) per kWh of projected annual energy savings1 (50% increase)||70 percent of total project cost|
1 Incentives are subject to PSE cost-effectiveness standards.
2 TLED Lamps replacing T12, T8 or T5 fluorescent lamps in existing or new fixtures (this includes all "Plug and Play", "Ballast ByPass" and "External Driver" TLEDs)
3 LLLC fixture bonus is limited to
Each fixture must include both an integral occupancy and daylight sensor, and must have wireless networking capabilities with embedded lighting control logic. The system shall also have the capability to allow the user to turn the lights off.
4 Lighting components are an LED module(s), driver(s), sockets etc that are individually field installed and not wired together and assembled by a lighting manufacturer into a complete unit.
How to apply
To be approved for a conservation incentive, all projects require PSE written approval before work is started:
- Download and complete the 2020 Business Lighting Increased Incentives Application.
- Submit the completed Business Lighting Application, the signed Customer/Payee Signature page from the workbook, a signed and completed current taxpayer identification form (W-9), and manufacturer specification sheets of all lighting products to email@example.com.
- Wait for the PSE grant agreement.
After PSE reviews and approves the workbook, you will be sent a grant agreement contract which must be signed and returned to PSE within 90 days of receipt. Project installation may not proceed until PSE receives the signed grant agreement and returns the fully executed grant agreement to you.
The total value of your business lighting incentive depends on the size and scope of your project. For smaller-scale lighting upgrades, see if PSE's Lighting To Go instant discounts can also help.
Do I qualify?
Before planning your business lighting upgrade, be sure to verify that you're only using new, incentive-eligible lighting products.
All fixtures, retrofit kits and lamps must meet PSE minimum specifications (UL, ETL or equal listing, Power Factor > 0.9, Manufacturer's warranty > 5 years). A manufacturer’s specification sheet is required to be submitted for every incentive eligible light fixture.
To be eligible for PSE's business lighting incentives:
- Your business site must be within PSE's electric service area.
- You must be a current PSE business electric customer.
- You must complete the current 2020 Business Lighting incentive program application.
- You must sign and return the grant agreement AND be given approval to start before any work begins on the project.
For help verifying your qualifications, call an Energy Advisor at 1-800-562-1482, Monday through Friday from 8 a.m. to 5 p.m.
All qualifications can also be found on the “Terms and Conditions” tab of the 2020 Business Lighting Excel application.
If you are planning a street lighting retrofit or new street lighting installation on a metered account, follow the instructions above and email your application materials to firstname.lastname@example.org.
Please contact us at email@example.com before filling out the application if you are unsure if the lights are on a metered or unmetered account. All unmetered (flat rate schedule) street lights must be coordinated with PSE Pole Services.
Multifamily building retrofit*
Multifamily common area lighting projects use a different application than business lighting. If you are performing a multifamily common area lighting project, please contact the multifamily team at firstname.lastname@example.org.
* "Multifamily" applies to common areas of a campus or building with five or more attached dwelling units.
If you need help with your application, call an Energy Advisor at 1-800-562-1482, Monday through Friday from 8 a.m. to 5 p.m.
Case study: Puget Sound Energy
Puget Sound Energy saw an opportunity to improve lighting consistency and efficiency in its 11,000 square foot office location in Bothell, Wash. Older fixtures were update to new LED fixtures with smart capabilities, resulting in great energy savings and lighting improvements.
Read more to find out how Puget Sound Energy made its Bothell location a brighter place to work and achieved 72 percent energy savings by updating to luminaire-level lighting controls.
Have questions about PSE's green options, including energy efficiency tips and rebates, contractor referrals, electric cars and renewable energy options? We're here to help.
Call us at 1-800-562-1482, Monday through Friday 8 a.m. to 5 p.m. or contact us below.
Request a PSE Recommended Energy Professional (REP) to complete your energy efficient improvement upgrade.