
Enhanced Home Comfort with up to $8,000 in Heat Pump Incentives
If you're a Duvall* area resident with natural gas heating, you may be eligible for our heat pump program that offers up to $8,000 in incentives to help local families upgrade their home comfort systems by switching to an efficient electric heat pump system.
Heat pumps provide consistent, even temperatures throughout your home without the hot and cold spots common with other systems. They also filter and circulate air continuously, reducing dust and allergens. And unlike window AC units, they operate quietly both indoors and outdoors.
Learn more about the cost and energy savings heat pumps provide.
Whether you're interested in reducing your environmental impact, adding air conditioning to your home, or taking advantage of substantial incentives, now is the time to take advantage of this limited-time opportunity for Duvall area residents.
*Must be a Duvall area resident within specific neighborhoods of zip codes 98014 or 98019 - address verification by PSE is required. Your current primary heating system must be natural gas. This includes natural gas forced-air furnaces, wall heaters, and boilers.
Getting started with an installer
Ready to get started? This rebate is only available through the contractor working on your project. Find a trusted and reliable contractor through PSE’s Trade Ally Network.
Customer requirements
- You must be a current, PSE single-family residential natural gas or dual fuel (natural gas and electric) customer. Single-family new construction, multifamily (five or more attached units) and commercial accounts are not eligible.
- Your current primary heating system* must be fueled with PSE natural gas. This includes: natural gas furnace and natural gas boiler
- Customers with existing heat pumps, or have installed a new heat pump as air-conditioning only are not eligible.
*Unsure if natural gas is your primary heating system? Contact one of our Energy Advisors.
Equipment requirements
- Your new heat pump must be AHRI Certified®.
- Must install to comply with all federal, state, and local code requirements.
- Previous natural gas equipment is removed or decommissioned (cut and cap is allowed) after installation of electric heat pump system.
- All existing furnace equipment, including the furnace unit itself, must be physically removed from the property.
PSE Rebate Requirements | ||
---|---|---|
Pre Install Equipment | Post Install Equipment | HSPF/HSPF2 |
Natural Gas: natural gas forced-air furnace, boiler, or gas wall heater. | AHRI Certified Ducted Heat Pump (Split/Pkg) | No HSPF/HSPF2 minimum |
AHRI Certified Ductless Heat Pump | ≥ HSPF 9; HSPF2 8.1* |
Additional requirements for ductless equipment
- Your new ductless system must be AHRI Certified® as a variable speed mini-split and multi-split heat pump and use inverter technology, and be a minimum of ¾ ton in heating mode.
- At least one indoor head must be installed in the main living (high-flow) area, each bedroom, and any other high-flow rooms of the property.
- Attached or detached Accessory Dwelling Units (ADUs) may qualify for a ductless heat pump rebate if they meet the following criteria. Any qualifying ADU must:
- Be occupied full time
- Be a completely separate living area with no venting from the primary dwelling
- Include a fully-functioning kitchen and a full bathroom
Rebate requirements
- Must be installed by a PSE Trade Ally or REP.
- Rebate application must be submitted within 30 days of install.
- Rebates only available on new, qualifying equipment.
- Equipment that is replaced under warranty will not be eligible for a second rebate.
- One rebate per qualified single-family residence.
- Must install to comply with all federal, state, and local code requirements.
- Rebate cannot exceed the pre-tax purchase price of any rebated product
- Home or accessory dwelling units (ADUs) with existing heat pumps are not eligible
Learn more about rebates for multifamily buildings, apartments, or condos.